Ergonomic chair maintenance: cleaning and improving service life
Many people will have an office chair, computer chair or ergonomic chair. Chairs are also one of our most frequently used healthy working companions. Faced with dust, stains and other problems, do you know how to maintain and clean your chair? Today I will bring you a guide to care for ergonomic chairs. The following will take computer chairs as an example.
How to ensure the glossiness of aluminum alloy chair legs after long-term use?
Aluminum alloy materials are more popular among consumers because of their light weight and strong durability. Therefore, computer chairs with aluminum alloy chair legs are more popular. However, if the chair legs are in contact with the ground for a long time, they are easily contaminated with floor dust and water stains. They may also act as "foot pedals" during use, which will cause stains over time.
Cleaning method: In daily cleaning, you can wipe it with clean water first, and then use a semi-dry and wet rag to wipe away the water stains on the surface of the aluminum alloy chair legs. If the stains are difficult to clean for a long time, you can also try to wipe them with a mixture of equal parts hot water and white vinegar to quickly restore the bright appearance of the aluminum alloy chair legs.
There are stains on the backrest, how should I clean it?
How to clean the leather computer chair: You can wipe it with clean water first, then use a sponge dipped in professional cleaning agent to clean it slowly in circles. Don’t forget to apply maintenance oil after cleaning to prevent the skin from cracking.
How to clean the mesh computer chair: When cleaning, you can first tap the edges with your hands to tap out the dust at the seams between the plastic chair frame and the mesh cloth, and then use a wet sponge to dip a small amount of cleaning paste and wipe it repeatedly. After cleaning the dirty areas, wipe them dry or blow dry them with a hair dryer.
How to deal with dust accumulation on seat cushions?
The cleaning process for leather computer chair seat cushions and chair backs is similar. When cleaning, you can wipe it back and forth in the direction of the leather grain. Choosing nano sponges can get twice the result with half the effort.
Due to its texture and long-term contact with the human body, mesh-covered cushions not only tend to accumulate dust in their pores, but are also corroded by oil and sweat on the skin.
Treatment method: When cleaning, you can first pat the surface, and then use a small brush or vacuum cleaner to remove dust, hair and debris on the surface. Then wipe the surface with clean water with a rag, and gently scrub with a small brush dipped in weak alkaline detergent for deep cleaning. After scrubbing, use a wet rag to press the surface several times to remove the detergent until there is no foam, then let it sit to dry or blow dry.
Note: Computer chairs in white, gray and other colors should not be exposed to direct sunlight for too long as they are prone to oxidation and discoloration. You can choose to dry them in the shade or dry them for a short time. Do not use a hair dryer for too long to avoid thermal deformation of the material or separation and loosening of components.
How to clean the armrests and chair frames?
Most of the armrests and chair frames of computer chairs are made of plastic, and they only need to be wiped clean with a rag during daily maintenance.
The chair frame behind the chair and the air pressure rod under the seat cushion are located in a skewed position and are not easy to access during use. They are the hardest hit areas for dust accumulation. You can refer to the above dry and wet method for cleaning.
For computer chairs, the service life will be longer if they are well maintained. If your chair has not been cleaned for a long time, you might as well put down your mobile phone now and clean this "workplace partner" who works diligently every day.
