Simple maintenance method of office chair
The ease of use of the office swivel chair is not only found in the office, but also common in the home. Its appearance brings us great convenience and comfort, but it often causes problems, so what is the office chair repair method?
I think many friends don't know what to do, we can solve some small problems by ourselves. If we can't solve the problem by ourselves, we can find a professional master nearby to deal with it.
So let's share the steps of office chair maintenance:
1. First know the details of chair accessories. Generally speaking, chair accessories include backrest, cushions and casters, five-star tripod, functional chassis and air rod. These accessories can cooperate with each other, allowing us to enjoy the leisure and convenience brought by the swivel chair. If any component is defective, it will need to be repaired.
2. When repairing the office chair, be sure to place it on a level ground, usually with a screwdriver and various tools to remove the bottom base. Then put the chair on its side and pay attention to fix it to avoid left and right rotation. At this point, look carefully at the chair, usually, only a small part needs to be replaced.
3. If there is a problem with the gas cylinder of the chair, please remove the existing gas cylinder. Care must be taken during this process. Carelessness can damage other parts, hold the gas cylinder tube of the swivel chair with pliers, open it, then release the gas cylinder, repeat this operation until the gas cylinder has fallen, make sure not to use brute force, otherwise it will cause serious damage. small loss
4. After removing the old cylinder, it is necessary to install a new one. The first is to find the right type, if the size of the cylinder is not suitable, it is also troublesome, we can install the cylinder according to its own application. This process cannot be too careless and the order of the components must be correct so as not to interfere with use.
5. Finally, it needs to be reassembled. Please make sure that all the small screws are in place. After assembly, you need to adjust whether the height is appropriate. Check the parts to make sure they are OK. For more troublesome faults, please find a professional master for installation.
